Go Back   Scale 4x4 R/C Forums > Scale 4x4 R/C Trux! > Scale 1.9's
Make payments with PayPal - it's fast, free and secure!

Scale 1.9's Scale trucks that use 1.9" tires. Discuss your XC and similar type trucks.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-21-2019, 01:51 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default Toyota LC70 SCX10 II

Good guys !!!!

After time without leaving and doing very little of the hobby, I return to the load. After this stop of almost two years, I only have the Blazer as a whole car and material, so I have to make a battle to give it a trot.

So, I start:

I will use the electronics, I have the Servo Turnigy MG959 V2 from 30kg to 6V, thanks to the variator and known by the analysis QUICRUN WP 1080 of Hobbywing. I will also use the RC4WD Raceline tire set in 1.9 that came with the Blazer with its hubcaps, although it will not have the Prowlers, it will have a Voodoo KLR that I already have mounted with Crawler innovation foams interior medium and soft exterior.

Sin tÝtulo by alberto espinosa, en Flickr

And today I will start assembling the Raw Builders kit of Axial SCX10 II acquired in the Team-Tracker store at an unbeatable price thanks to the friend I˝igo:

Sin tÝtulo by alberto espinosa, en Flickr


I had an entertaining weekend ...:

The SCX10 and a Tamiya XV01 for a friend ...

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Here the body too, again thanks to I˝igo de Tracker, for the service and the price:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Here the first things, the axles had to be adjusted with washers, and I told a fellow that these used to need:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Here already mounted, the tranny mount it to the back of as they ask for the instructions not to have to cut the base of the box and that everything enters the body:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

I cut the battery holder as it comes standard, in the gap left I put the electronics and I made a cross bracket that painted black for the battery:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr


And the servo so that it does not rub with the panhard I have raised it a little more and I have mounted the bar of curved direction of rc4wd:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Here you can see the height left before, compressed to the top:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

And here behind, where you see that the body can not go below:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Well, I've already taught him the dremel:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Removed the rear overhang, now caulking etc ...:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

And I started with the paint while the putty dries:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Finished painting:

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Horror House hahahaha :

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

And well, for lack of details, fasten the body and cantilever suspension system that is printing a friend in 3d (the bumper I have cut it because it will take another, but until it arrives if I use it to carry something):

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr

Scx10 II lc70 freedom83 by alberto espinosa, en Flickr
Reply With Quote
Sponsored Links


The sponsored ad above is only displayed to guests. Creat an account today to remove this ad!
  #2  
Old 01-21-2019, 06:25 PM
Ontherocks91's Avatar
Ontherocks91 Ontherocks91 is offline
Old Time'r
 
Join Date: Oct 2006
Location: Greensboro, NC
Posts: 948
Member Number: 1148
B/S/T Feedback: (0)
Default

nice! hopefully will be starting my raw builders kit soon as well! welcome back as well a lot has changed in two years
__________________
F-350 Crew Cab Dually
http://www.scale4x4rc.org/forums/sho...049#post180049
Reply With Quote
  #3  
Old 01-22-2019, 01:07 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default

Quote:
Originally Posted by Ontherocks91 View Post
nice! hopefully will be starting my raw builders kit soon as well! welcome back as well a lot has changed in two years
Thanks mate !!!

In raw kit , As a tip, adjust the spool with washers (has a yota of rc4wd), be careful with the location of the servo, you can rub the horn with the panhard bar , and depends on the body you can mount the base with the tranny upside down to gain space. As a peculiarity, the kit brings the balls of rod end in plastic, I put traxxas metal balls.
Reply With Quote
  #4  
Old 01-23-2019, 12:12 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default

Waiting for money for loops bumper , with this , better ... hehehe :

Lc70 freedom83 by alberto espinosa, en Flickr

Lc70 freedom83 by alberto espinosa, en Flickr

Lc70 freedom83 by alberto espinosa, en Flickr
Reply With Quote
  #5  
Old 02-04-2019, 03:12 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default

Well this weekend, he has played the cantilever in 3D and thus be able to fix body and some more details:

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Here is how the bed is resting on the stringers:

Sin tÝtulo by alberto espinosa, en Flickr

Here forcing the aletin a bit, I'll get that little gap I needed for the tires:

Sin tÝtulo by alberto espinosa, en Flickr

And here is a picture of a bumper that I'm doing in plastic, we'll see what comes out:

Sin tÝtulo by alberto espinosa, en Flickr
Reply With Quote
  #6  
Old 02-06-2019, 03:19 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

I've finished with the black paint, just need to hold the bumper and some detail:

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr
Reply With Quote
  #7  
Old 02-11-2019, 12:44 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default

Black inner headligths & ligthweigth rear deco , READY TO CRAWL :

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr
Reply With Quote
  #8  
Old 02-18-2019, 02:50 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default

mudded !!!

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr
Reply With Quote
  #9  
Old 02-19-2019, 09:20 AM
4x4lover4499's Avatar
4x4lover4499 4x4lover4499 is offline
To many projects not enough time.
 
Join Date: Sep 2011
Location: Stevensville, Mt
Posts: 763
Member Number: 16060
B/S/T Feedback: (0)
Default

That looks great mudded out!
__________________
When in doubt, Throttle out!
Reply With Quote
  #10  
Old 04-01-2019, 01:25 AM
FREEDOM83's Avatar
FREEDOM83 FREEDOM83 is offline
-Football +Races
 
Join Date: Jun 2013
Location: Gasteiz,Spain
Posts: 316
Member Number: 20423
B/S/T Feedback: (0)
Default

saturday minitest for new invisible mods :

Sin tÝtulo by alberto espinosa, en Flickr

Sin tÝtulo by alberto espinosa, en Flickr
Reply With Quote


Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:10 PM.


Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright ę2004 - 2019, Scale 4x4 R/C