Go Back   Scale 4x4 R/C Forums > In General > Tools of the Trade
Make payments with PayPal - it's fast, free and secure!

Tools of the Trade If you a question about what tools we use in creating our trucks here. Also discuss any tool experiences you have, the good the bad and the ugly! Hand tools to all out CNC machines!


Reply
 
Thread Tools Display Modes
  #1  
Old 12-14-2016, 11:40 PM
Pop A Top Pop A Top is offline
Pop A Top
 
Join Date: Dec 2016
Location: Council Bluffs, Iowa
Posts: 13
Member Number: 25086
B/S/T Feedback: (0)
Thumbs up Aluminum angle, bar and flat stock sizes

Hello guys,

Pop A Top here looking for some info to build myself a custom trailer frame.

What material should I be getting to do the project i.e. frame rails and cross members for the flooring the flat stock thicknesses I have a brake for bending the stuff but not sure what to get or how much would be needed to do a 53' drop deck and a 53' RGN lowboy.

I appreciate your advise,

Thank you,

Bob
Reply With Quote
  #2  
Old 01-15-2017, 01:28 PM
JoeThePro's Avatar
JoeThePro JoeThePro is online now
Posts all the Time'r
 
Join Date: Jan 2010
Posts: 182
Member Number: 10576
B/S/T Feedback: (0)
Default

Im no expert, but you can get 3/8" to 1/2" square steel tubing and then heat tp bend/shape it to the rail shape you want, and then cut it in half with something like a band/scroll saw. It doesn't need to be very thick at all, maybe 16 gauge (0.06").

Aluminum is probably harder to shape like this.
Reply With Quote


Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 07:16 AM.


Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004 - 2016, Scale 4x4 R/C