![]() |
![]() |
||
|
|
Scale 2.2's Discuss your scale trucks that use 2.2" sized tires. TLT based and similar. |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() Hi
After sometime learn from you all, I just want to say thanks ![]() This is a simple build and trying just a little modification on the vintage bruiser chassis. I start with measure the wheelbase, cut the rear chassis, cut the back grille, make a body mounting, bumper/bracket and acessories, etc and hope next pictures will help me to explain the detail…enjoy, thks for the space... PS : I am not sure this should be in large scale thread or 2.2 , I prefer to posting here |
Sponsored Links |
The sponsored ad above is only displayed to guests. Creat an account today to remove this ad! |
#2
|
||||
|
||||
![]() Nice work so far. That body makes for a fantastic scale build
![]() Welcome to the board ![]()
__________________
|
#3
|
||||
|
||||
![]() Hey...fellow Indonesian.... welcome aboard. I have seen your camel landy on you tube too.
Great job. Anton Last edited by rc driver wannabe : 04-06-2009 at 05:40 AM. Reason: Correction. |
#6
|
||||
|
||||
![]() Time to do modification for my scale beadlock wheels to fit with bruiser axle (no modification on bruiser axle !!!!).
![]() Originally is 12mm Hex mount, drill and lathe to fit with brass bushing, and Center cup used as locker. |
#8
|
||||
|
||||
![]() Quote:
Quote:
Quote:
thanks for the comments ![]() |
#11
|
||||
|
||||
![]() Quote:
Fyi, correction and aligment already on the wheels...again no modification/correction on the axle... ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
|